Epson SureColor F6070 User's Guide download pdf (Page 67)

Maintenance 67

9. The printer will return to its ready-to-print state once the last color has been set.

Replacing and Refilling Consumables

Time Period for Chip Unit Replacements and Ink Refills

If the message Chip unit expended. is displayed on the control panel, this means that the

chip unit needs to be replaced soon. Obtain an ink pack of the appropriate color as soon

as possible.

You will be unable to print if the chip unit for even one color needs to be replaced. If the

Chip unit expended. message is displayed during a print job, you can replace the chip unit

and refill the ink while printing continues.

See “Options and Consumable Products” on page 93.

Important:

This printer has a remaining ink warning system. Use the following procedure to replace the chip

unit and refill the ink correctly.

After the service engineer attaches the ink tanks, replace the chip unit and refill the ink when

remaining ink is about 2.8 inches (70 mm) from the bottom of the ink tank.

This system does not directly detect the amount of ink remaining in the ink tank. Instead, the

amount of ink remaining is estimated based on the ink usage conditions and displayed as a

message. To maintain the accuracy of this system, you must replace the chip unit and refill the

ink as soon as possible once the remaining ink is 2.8 inches (70 mm) or less from the bottom of

the ink tank.

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 110 111

No comments

Epson SureColor F6070 User's Guide Page 67