Epson SureColor F6070 User's Guide Page 84

  • Download
  • Add to my manuals
  • Print
  • Page
    / 111
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 83
Problem Solver 84
When a Maintenance Call/Service Call Occurs
Paper Size Error
Loaded paper is not
supported size.
The loaded paper width is not supported. Press the OK button and
remove the paper.
Paper for use in the printer must be at least 10 inches (254 mm) wide.
Use paper that is at least 10 inches (254 mm) wide.
Should this message be displayed with paper of a width that can be
used in the printer, you may be able to print if you select Off for Paper
Size Check in the Setup menu.
See “Setup Menu” on page 56.
Error messages What to do
Maintenance Request
Replace Part Soon/Replace Part
Now
XXXXXXXX
A part used in the printer is nearing the end of its service life.
Contact your dealer or Epson Support and tell them the
maintenance request code.
You cannot clear the maintenance request until the part is
replaced. A service call occurs if you continue to use the
printer.
Call For Service
XXXX Error XXXX
Power off and then on. If this
doesn’t work, note the code
and call for service.
A call for service occurs when:
O The power cable is not connected securely
O An error that cannot be cleared occurs
When a call for service has occurred, the printer automatically
stops printing. Turn off the printer, disconnect the power cable
from the outlet and from the AC inlet on the printer, and then
reconnect. Turn on the printer again multiple times.
If the same call for service is displayed on the LCD panel,
contact your dealer or Epson Support for assistance. Tell them
the call for service code is “XXXX”.
Message What to do
Page view 83
1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 110 111

Comments to this Manuals

No comments