Epson TM-U925 User Manual download pdf (Page 31)

Using the Printer 2-3

RECEIPT OUT (red)

The RECEIPT OUT light is on (not blinking) when the paper roll is

not installed or is at or near the end. The RECEIPT OUT light blinks

after the self test prints the printer settings on the roll paper.

SLIP (green)

The SLIP light is on or blinking while the printer is in slip paper

mode.

The SLIP light blinks while the printer is waiting for slip paper to be

inserted or removed.

Slip Paper Handling

Use only slip paper that matches the printer’s specifications. See

Paper Specifications in Chapter 4.

Note:

Be sure to install a paper roll in the printer even if you plan to print

only on slip paper. This will prevent paper jams. You can also

prevent paper jams by using slip paper that is flat and has no

wrinkles, creases, or folds.

1. Send appropriate control commands from the computer to

print on slip paper.

2. When the SLIP light blinks, insert the slip paper into the slip

paper inlet using the right edge of the slip paper inlet as a

guide.

Make sure you insert the slip paper into the inlet as far as it will

go (i.e., insert the slip paper up to the mark on the left side of

the printer).

The paper is automatically drawn into the printer and printing

begins.

U925_eng.book Page 3 Thursday, July 25, 2002 9:15 AM

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 57 58

No comments

Epson TM-U925 User Manual Page 31