Epson TM-U925 User Manual download pdf (Page 54)

4-10 Reference Information

❏

Since the slip ejection detector uses a reflective photo detector,

paper that has holes or dark portions with low reflection (less

than 40% reflection) at the detector position must not be used.

(See the illustration below.)

❏

Be sure to perform slip printing with a paper roll loaded to

avoid paper jams.

❏

Use thinner paper (N30 or equivalent) between the top and

bottom sheets of multi-ply paper. If thick paper is used, the

copy capability is lowered

Electrical Characteristics

Paper holes and low reflection prohibited area

Supply voltage: +24 VDC ± 10%

Current consumption: Operating:

When feeding

slip paper to

the print

starting

position:

Mean - approx. 2.3 A,

approx. 1.4 seconds

Paper feed direction

10mm

(.39")

Make sure there are

no holes and low reflection

in this area of the paper

U925_eng.book Page 10 Thursday, July 25, 2002 9:15 AM

1 2 ... 49 50 51 52 53 54 55 56 57 58

No comments

Epson TM-U925 User Manual Page 54