Epson LX-1170 User Manual download pdf (Page 2)

Control Panel Buttons and Lights

Tear Off (Font) button**

●

Advances continuous paper to

the tear-off position.

●

Feeds continuous paper

backward from the tear-off

position to the top-of-form

position.

*Micro Adjust mode

When you hold down the Pause button for three

seconds, the printer enters the micro adjust mode. In this

mode, you can press the LF/FFD and Load/EjectU

buttons to adjust the top-of-form or tear-off position. See

Chapter 2, “Using the Printer.”

**Font select

In the Micro Adjust mode, you can select the font to use

for printing by pressing the Tear Off button. The Tear Off

lights turn on, off or flash to indicate the selected font.

Pause button

Stops printing

temporarily, and

resumes printing when

pressed again. When

pressed for three

seconds, turns on the

Micro Adjust mode*. To

turn off, press again.

Pause light

●

On when the printer

is paused.

●

Flashes when the

printer is in the Micro

Adjust mode*.

●

Flashes when the

print head has

overheated.

Paper Out light

●

On when no paper

is loaded in the

selected paper

source or when

paper is not

loaded correctly.

●

Flashes when

paper has not

been fully ejected

or a paper jam has

occurred.

LF/FF button

●

Feeds paper line

by line when

pressed and

released.

●

Ejects a single

sheet or advances

continuous paper

to the next

top-of-form

position when held

down.

Load/Eject button

●

Loads a single sheet

of paper.

●

Ejects a single sheet

of paper if a sheet is

loaded.

●

Loads continuous

paper from the

standby position.

●

Feeds continuous

paper backwards to

the standby position.

Tear Off (Font) lights**

●

Flash when continuous paper is in

the tear-off position; otherwise, the

lights indicate the selected font.

1 2 3 4 5 6 7 ... 153 154

Comments to this Manuals

No comments

Epson LX-1170 User Manual Page 2

Comments to this Manuals

Related products and manuals for Label printers Epson LX-1170