Epson LX-1170 User Manual download pdf (Page 47)

Using the Printer

2-7

Auto I/F (interface) wait time

This setting takes effect only when I/F (interface) mode is set to

Auto. This setting determines how long the printer waits when it

no longer receives data from an interface before it checks whether

a print job is being sent through the other interface. You can

specify 10 seconds or 30 seconds for the auto interface wait

time.

Baud rate

Use this option to set the data transfer rate (baud) for the serial

interface. The baud rate is measured in bits per second (bps). See

your computer manual and software documentation for the

proper setting.

Parity

When this option is set to None, parity checking is disabled. The

parity bit, if used, provides a basic form of error detection. See

your computer manual and software documentation for the

proper setting.

Data length

Set the data length of the serial interface to 7 bit or 8 bit. See your

computer manual and software documentation for the proper

setting.

Parallel I/F bidirectional mode

The parallel interface bidirectional transfer mode is used when

this feature is turned on. If bidirectional transfer mode is

unnecessary, turn this off.

Packet mode

Select Auto to use the IEEE-1284.4 packet transfer mode. If packet

transfer mode is unnecessary, or if you cannot connect, turn this

off.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 153 154

No comments

Epson LX-1170 User Manual Page 47