Epson LX-1170 User Manual download pdf (Page 62)

2-22

Using the Printer

Adjusting the top-of-form position

The top-of-form position is the position on the page where the

printer starts printing. If your printing appears too high or low

on the page, you can use the micro adjust feature to adjust the

top-of-form position. Follow these steps:

Caution:

Never use the paper-feed knob to adjust the top-of-form position;

this may damage the printer or cause it to lose the top-of-form

position.

Note:

❏ Your top-of-form position setting remains in effect until you change

it, even if you turn off the printer.

❏ The top margin setting made in some application software overrides

the top-of-form position setting you make with the Micro Adjust

feature. If necessary, adjust the top-of-form position in your

software.

1. Make sure the printer is turned on.

2. If necessary, load paper as described in this chapter.

3. Remove the printer cover.

4. Hold down the Pause button for about three seconds. The

Pause light starts flashing and the printer enters the Micro

Adjust mode.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 153 154

No comments

Epson LX-1170 User Manual Page 62