Epson ACULASER M8000 User's Guide download pdf (Page 185)

To print a configuration status sheet from the printer’s control panel, see “Printing a Configuration

Status Sheet” on page 105.

To print a configuration status sheet from the printer driver, for Windows, see “Printing a

configuration status sheet” on page 205.

Operational Problems

The Ready light does not turn on

Cause What to do

The power cord may not be properly plugged into the

electrical outlet.

Turn off the printer, check the power cord connections between

the printer and the electrical outlet, then turn the printer back on.

The electrical outlet may be controlled by an outside

switch or an automatic timer.

Make sure that the switch is turned on or plug another electrical

device into the outlet to check whether the outlet is operating

properly.

The circuit breaker switch located on the back of the

printer is off.

Make sure that there is no electrical leakage, and then turn the

circuit breaker switch on. See “Earth leakage circuit protector” on

page 15.

The printer does not print (Ready light off)

Cause What to do

The printer is offline.

Press the Start/Stop button once to switch the printer to ready

status. Make sure that the Ready light turns on.

Some error may have occurred. Check the LCD panel to see if an error message appears.

The Ready light is on but nothing prints

Cause What to do

Your computer may not be properly connected to the

printer.

Perform the procedure illustrated in the Setup Guide.

EPSON AcuLaser M8000 Series User's Guide

Troubleshooting 185

Downloaded from ManualsPrinter.com Manuals

1 2 ... 180 181 182 183 184 185 186 187 188 189 190 ... 247 248

No comments

Epson ACULASER M8000 User's Guide Page 185