Epson ACULASER M8000 User's Guide download pdf (Page 193)

Cause What to do

The imaging cartridge may be near the end of its service

life.

If the message on the LCD panel or in EPSON Status Monitor

indicates that the imaging cartridge is near the end of its service

life, replace the imaging cartridge. See “Replacing Consumable

Products” on page 147.

For Windows users, you can also check the remaining service life

of the imaging cartridge by looking at the Basic Settings tab in

the printer driver.

There may be a problem with imaging cartridge. Replace the imaging cartridge. See “Replacing Consumable

Products” on page 147.

The Density setting may be too dark.

In the printer driver, click Extended Setting on the Optional

Settings tab, and then lighten the Density setting.

The non-printed side of the page is dirty

Cause What to do

Toner may have spilled onto the paper feed path. Clean internal printer components by printing three pages with

only one character per page.

Print quality decreased

Cause What to do

The printer cannot print in the required quality level

because of insufficient memory, and the printer lowers

the quality automatically so that the printer can continue

printing.

Check to see if the printout is acceptable. If not, add more memory

for a permanent solution or lower print quality temporarily in the

printer driver.

If RAM Disk is set to Maximum or Normal on the control panel, you

can increase the available memory space by changing this setting

to Off.

EPSON AcuLaser M8000 Series User's Guide

Troubleshooting 193

Downloaded from ManualsPrinter.com Manuals

1 2 ... 188 189 190 191 192 193 194 195 196 197 198 ... 247 248

No comments

Epson ACULASER M8000 User's Guide Page 193