Epson ACULASER M8000 User's Guide Page 188

  • Download
  • Add to my manuals
  • Print
  • Page
    / 248
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 187
Printout Problems
The font cannot be printed
Cause What to do
For Windows users, you may use the printer fonts
substituted for specified TrueType fonts.
In the printer driver, choose the Print TrueType fonts as bitmap
check box in the Extended Settings dialog box.
The selected font is not supported by your printer. Make sure that you have installed the correct font. See the Font
Guide for more information.
Printout is garbled
Cause What to do
The interface cable may not be plugged in securely. Make sure that both ends of the interface cable are plugged in
securely.
You may not be using the correct interface cable. If you are using the parallel interface, make sure that the cable is
a double-shielded, twisted-pair interface cable no more than six
feet in length.
If you are using the USB interface, use a Revision 2.0 cable.
The emulation setting for the port may not be correct. Specify the emulation mode by using the printer’s control panel
menus. See “Emulation Menu” on page 69.
Note:
If a configuration status sheet does not print correctly, your printer may be damaged. Contact your
dealer or a qualified service representative.
The printout position is not correct
Cause What to do
The page length and margins may be set incorrectly in
your application.
Make sure that you are using the correct page length and margin
settings in your application.
The Paper Size setting may be incorrect. Make sure the correct paper size is set in the Tray Menu on the
control panel.
EPSON AcuLaser M8000 Series User's Guide
Troubleshooting 188
Downloaded from ManualsPrinter.com Manuals
Page view 187
1 2 ... 183 184 185 186 187 188 189 190 191 192 193 ... 247 248

Comments to this Manuals

No comments