Epson TM-T70 Instruction Manual download pdf (Page 25)

Rev. A Setup 2-3

TM-T70 Technical Reference Guide

2.2 Setting the DIP Switches

On this printer, you can make various settings with DIP switches.

Note:

Serial interface communication conditions must be set on serial interface model printers.

2.2.1 DIP Switch Positions and Steps for Changing DIP Switch Settings

Follow the steps below to change the DIP switch settings.

CAUTION:

Before you remove the DIP switch cover, turn the printer off. Otherwise, a short-circuit

may cause the printer to malfunction.

1. Make sure the power supply for the printer is turned off.

2. Unscrew the screw to remove the DIP switch cover from the base of the printer.

Figure 2-11 Removing the DIP switch cover

3. Set the DIP switches as desired, using the tip of a tool, such as a small screwdriver.

4. Attach the DIP switch cover, and screw in place.

Note:

New DIP switch settings are enabled after the printer is turned on.

2.2.2 DIP Switch Functions

The DIP switch functions depend on your printer’s interface specifications.

DSW1

DSW2

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 83 84

No comments

Epson TM-T70 Instruction Manual Page 25