Epson ActionLaser 1600 EPL-5600 User Manual download pdf (Page 10)

System and memory requirements

Any Macintosh computer to which the printer is connected

must be running System 7.x and have at least 2 MB of RAM.

Caution:

Do not install EpsonScript on a computer running System 6.x

or earlier. Installing EpsonScript on early systems can corrupt

them.

The memory requirements for your printer depend on which

option and printer you are using. Make sure your printer has

the minimum amount of memory required for your option as

shown in the following table.

Option

Minimum winter memory

EpsonScrIpt Level 2 cartridge (C83202*)

1.5 MB

EpsonScript Level 2 board (C83209*)

2MB

You may need to add more memory if you regularly print

documents with detailed graphics, complex layouts, or paper

larger than A4 or letter size. Also, if you use the Page Protect

mode, you may need more memory than shown in the table.

By reducing resolution to 300 dpi, you can save memory.

If you have an EPL-5000/5200 or an ActionLaser 1000/1500

and you want to connect it to more than one computer, you

must assign at least the minimum amount of required memory

to the channel using the EpsonScript option. See your printer

manual for more information.

4 Introduction

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 69 70

No comments

Epson ActionLaser 1600 EPL-5600 User Manual Page 10