Epson Stylus PHOTO 1290 User's Guide download pdf (Page 189)

10-8 Troubleshooting

❏ Make sure that Maximum is not selected as the Printable Area

setting in your printer software. When this setting is selected,

banding may occur in the expanded area.

❏ Make sure that the Media Type selected in the printer

software is appropriate for the type of media loaded in the

printer.

❏ Select MicroWeave if the setting is active.

Vertical misalignment or banding

Try one or more of these solutions:

❏ Make sure that the printable side of the paper is face up in the

sheet feeder.

❏ Run the Print Head Alignment utility.

❏ Clear the High Speed check box in the Advanced dialog box

of your printer software’s Advanced dialog box. For

Windows users, see “Making the Advanced settings” on page

3-12 for details. For Macintosh users, see “Making the

Advanced settings” on page 5-11.

❏ Select MicroWeave if the setting is active.

❏ Run the Head Cleaning utility to clear any clogged ink

nozzles.

❏ Make sure that the Media Type setting selected in the printer

software is appropriate for the type of media loaded in the

printer.

❏ Make sure that the position of the adjust lever is appropriate

for the media type. When printing on media of normal

thickness, set the adjust lever to the “–” position. When

printing on envelopes or thick media, set the position to “+” .

1 2 ... 184 185 186 187 188 189 190 191 192 193 194 ... 240 241

No comments

Epson Stylus PHOTO 1290 User's Guide Page 189