Troubleshooting 10-11
❏ Remove each sheet from the output tray as it is printed,
especially if you are using transparencies.
❏ If you are printing on glossy media or transparencies, place a
support sheet (or a sheet of plain paper) beneath the stack. Or,
load only one sheet at a time.
❏ When printing on thick media, set the adjust lever to the “+”
position.
❏ Run the Head Cleaning utility.
❏ Run the Print Head Alignment utility.
❏ Load and eject dry paper several times. If the problem
persists, ink may have leaked inside the printer, so wipe the
inside of the printer with a soft, clean cloth.
Warning:
Be careful not to touch the gears or rollers inside the printer.
Caution:
Be careful not to wipe grease on the metal parts under the
ink carriage passage.
Wipe here
Comments to this Manuals