Epson Stylus PHOTO 1290 User's Guide download pdf (Page 61)

Printing with Windows 3-23

Copies Select the number of copies that you want to print. You

can select Collate to print one set at a time or Reverse

Order to print your documents in reverse order, starting

with the last page.

Orientation Select Portrait (tall) or Landscape (wide) to change the

orientation of your printout. To print closer to the bottom

of the page, select the Rotate by 180° check box.

Printable Area Use this option in the Printable Area Box to adjust the total

area available for printing when sheet Feeder is selected

as the Paper Source setting. This feature is not available

when No Margins or Roll Paper is selected.

To center the printout, select Center. To increase the

printable area at the bottom edge from 14mm to 3mm,

select Maximum. Do not select Maximum while using

Premium Glossy Photo Paper or Ink Jet Back Light Film

(Stylus Photo 1290).

Note:

The print quality may decline at the edges of the printout

when Maximum is selected as the Printable Area setting.

Before printing large jobs using this setting, print a single

sheet to confirm quality.

When Maximum is selected, make sure that the paper

loaded in the sheet feeder is not curled.

If you select Maximum when printing on Premium Glossy

Photo Paper, your printout may be smeared in the

expanded area (between 14 mm and 3 mm from the

bottom edge)..

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 240 241

No comments

Epson Stylus PHOTO 1290 User's Guide Page 61