Epson Stylus PHOTO 1290 User's Guide download pdf (Page 28)

Using Roll Paper 2-5

The roll paper is now loaded. Next, set up the printer software

and try printing. For details on setting up the printer software,

refer to “Printing on Roll Paper” on page 2-5.

Printing on Roll Paper

Once you have prepared your roll paper and it is loaded in the

printer, you must make settings in the printer software in order

to print.

Printing area and margins in Roll Paper

You can apply various settings for printing area and margins on

roll paper with driver settings. There are two types of margin

settings: Even if 3-mm of both side of paper or No Margins is

selected, the top margin is automatically set to 20 mm.

Refer to the table below for the instructions.

3-mm of both side of paper

Select Roll Paper as the Paper Source in the printer

driver.

When printing is finished, press the

roll paper button

once to print a cutting guideline about 12mm from the

bottom of the print data.

To print the next print job, press the

roll paper button

to feed the paper back to the printing position, then

apply printing. In this case, the space between the two

blocks of print data will be 36mm.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 240 241

No comments

Epson Stylus PHOTO 1290 User's Guide Page 28