Epson Software Film Factory v3.0 User's Guide download pdf (Page 16)

Page 16

BEFORE YOU BEGIN:

Print the Conﬁguration page from the Control Panel and note the IP Address of the

RIP Station.

You can also set up a Domain Name Server (DNS) for the IP address of the RIP Station in

the HOSTS ﬁle and use that name. See your Windows system documentation for

information.

TO CONFIGURE THE CONNECTION TO THE RIP STATION:

1. Launch ColorWise Pro Tools by double-clicking its icon (Mac OS and Windows) or by

choosing it from the Start>Programs>Fiery menu (Windows).

The Choose Printer Device dialog box appears.

2. If you have previously conﬁgured a Windows connection to the RIP Station, then you are

ready to use ColorWise Pro Tools. See “Using ColorWise Pro Tools” on page 29.

If you have not previously conﬁgured a connection, click Add.

3. Enter the appropriate information for the RIP Station.

Nickname

—Enter a name for the RIP Station. This name can be any name you wish; it

does not have to match the actual Server Name of the RIP Station.

NOTE: The Nickname cannot contain any of the following seven characters:

[ ] _ " ' <space> <tab>

Protocol—Choose the type of network protocol you are using from the pop-up menu.

NOTE: ColorWise Pro Tools software is supported only with TCP/IP, so no choice is

necessary.

Server Name—Enter the IP address (or DNS or hosts name) of the RIP Station.

IPX Address—(This area is not enabled for ColorWise Pro Tools.)

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 59 60

No comments

Epson Software Film Factory v3.0 User's Guide Page 16