Epson Software Film Factory v3.0 User's Guide download pdf (Page 50)

Page 50

Network Setup

You can modify most of the Network Setup options— including Port Setup, Protocol

Setup, PServer Setup, and Service Setup— from Fiery WebSetup.

TO CONFIGURE PORT SETUP:

• Click the Port Setup tab in the Network Setup dialog box.

You can then adjust settings as detailed in the following sections.

Port Setup (Ethernet)

Enable Ethernet—Select if the RIP Station is to be connected to an Ethernet network.

Transmission Speed—Select Auto Detect if your network environment is mixed, or select

the speed (10 Mbps or 100 Mbps) of the network to which the RIP Station is attached.

The options 10 Mbps TP and 10 Mbps AUI refer to how the Ethernet cable is connected,

either through twisted pair cable or the AUI.

Port Setup (Parallel Port)

Enable Parallel Port—Select if you want to print through the parallel port. You can connect

a single Windows computer to the parallel port and print directly to the RIP Station.

NOTE: Enabling the parallel port does not conﬂict with using Ethernet communication with

the RIP Station.

Ignore EOF Character—Available only if Enable Parallel Port is selected, this option specifies

that the RIP Station should ignore end-of-file (EOF) messages. Check this box to print

PostScript files in binary format (not ASCII); under normal circumstances, the box should

not be checked. When this option is selected, the RIP Station uses the parallel port timeout

value to determine when the end of the file has been reached.

Parallel Port Timeout (seconds)—Available only if Enable Parallel Port is selected, this set-

ting determines how long the RIP Station waits without receiving data from the parallel

port before deciding that the current job is complete. Until the timeout, the RIP Station

cannot receive new jobs through the parallel port, but it can continue to receive network

print jobs.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 59 60

No comments

Epson Software Film Factory v3.0 User's Guide Page 50