Epson AcuLaser M2010D User's Guide Page 90

  • Download
  • Add to my manuals
  • Print
  • Page
    / 169
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 89
Troubleshooting 90
Printing a Status Sheet
To confirm the current status of the printer, and that the options are installed correctly, print a
status sheet using the printer’s control panel or the printer driver.
To print a status sheet from the printer’s control panel, see “Control panel” on page 22.
To print a status sheet from the printer driver, for Windows, see “Printing a status sheet” on page
113.
Operational Problems
The Ready light does not turn on
The printer does not print (Ready light off)
The Ready light is on but nothing prints
Cause What to do
The power cord may not be properly plugged into
the electrical outlet.
Turn off the printer, check the power cord connections between
the printer and the electrical outlet, then turn the printer back on.
The electrical outlet may be controlled by an
outside switch or an automatic timer.
Make sure that the switch is turned on or plug another electrical
device into the outlet to check whether the outlet is operating
properly.
Cause What to do
The printer is offline. Press the Start/Stop button once to switch the printer to ready
status.
Some error may have occurred. Check if an error light is on or flashing. See “Status and Error
Lights” on page 100.
Cause What to do
Your computer may not be properly connected to
the printer.
Perform the procedure illustrated in the Setup Guide.
The interface cable may not be plugged in securely. Check both ends of the interface cable between the printer
and the computer.
Downloaded from ManualsPrinter.com Manuals
Page view 89
1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 168 169

Comments to this Manuals

No comments