Epson AcuLaser M2010D User's Guide Page 95

  • Download
  • Add to my manuals
  • Print
  • Page
    / 169
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 94
Troubleshooting 95
The printed image is light or faint
The non-printed side of the page is dirty
Print quality decreased
The toner cartridge may be near the end of its service
life.
If the message in EPSON Status Monitor indicates that the
toner cartridge is near the end of its service life, replace it. See
“Precautions for Replacing the Toner Cartridge” on page 64.
For Windows users, you can also check the remaining service
life of the toner cartridge by looking at the Basic Settings tab
in the printer driver.
Cause What to do
Your paper may be moist or damp. Do not store your paper in a humid or damp environment.
The Toner Save mode may be on. Turn off the Toner Save mode using the printer driver. To
modify the Toner Save mode using the printer driver, select the
Advanced button in the Basic Settings tab, and click the More
Settings. Deselect the Toner Save check box in the More
Settings dialog box for Windows users or in the Advanced
dialog for Mac users.
The toner cartridge may be near the end of its service
life.
If the message in EPSON Status Monitor indicates that the
toner cartridge is near the end of its service life, replace it. See
“Precautions for Replacing the Toner Cartridge” on page 64.
For Windows users, you can also check the remaining service
life of the toner cartridge by looking at the Basic Settings tab
in the printer driver.
Cause What to do
Toner may have spilled onto the paper feed path. Clean internal printer components by printing three pages
with only one character per page.
Printing was made right after clearing the paper jam. Make a few one-sided printouts.
Cause What to do
The printer cannot print in the required quality level
because of insufficient memory, and the printer
lowers the quality automatically so that the printer
can continue printing.
Check to see if the printout is acceptable. If not, add more
memory for a permanent solution or lower print quality
temporarily in the printer driver.
Downloaded from ManualsPrinter.com Manuals
Page view 94
1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 168 169

Comments to this Manuals

No comments