Epson Software Film Factory v3.0 User's Guide download pdf (Page 30)

Page 30

3. Under Check Print Settings, choose the desired calibration set.

Choose the appropriate calibration set for the type of media on which you will be printing

most often.

NOTE: It is not necessary to recalibrate before printing on a media type other than the one

you select here.

4. Under Generate Measurement Page, click Print.

5. Choose the paper size and input tray to use for the measurements page and click Print.

6. Use the EPSON Color Calibrator to read the measurements page data into a ﬁle.

See your EPSON Color Calibrator documentation for instructions.

7. Under Get Measurements, click From File and browse to the location of the ﬁle you created

with the EPSON Color Calibrator.

8. Select this ﬁle and click Open.

9. When you are notiﬁed that the measurements were read successfully, click OK, then click

Apply to implement the new calibration.

OTE: Changing the calibration has the potential to affect all jobs for all users, so you may

want to limit the number of people authorized to perform calibration. An Administrator

password can be set to control access to calibration from the RIP Station Control Panel.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 59 60

No comments

Epson Software Film Factory v3.0 User's Guide Page 30