Epson Stylus Pro 7710 User's Guide download pdf (Page 37)

Load the sheet into the paper insertion slot

until it meets resistance.

Align the right edge of the paper with the

setting position, and then insert the paper until

it meets resistance. When using paper sizes A4

or below, set the paper until it reaches the

bottom along the line on the metal part under

the paper insertion slot.

PRESS THE

BUTTON appears on the LCD

panel.

Note:

Load the sheet vertically, like most magazines.

Press the button.

The paper moves to the start position.

If ARE THESE SETTINGS OK? appears on the

LCD panel, press the

or button to select

NO and then press the

button. Set the

media type and paper remaining, and then

press the

button to set the media.

The previous setting appears on the LCD panel.

If the media type and paper remaining are

correct, select YES and then press the

button.

If you use the paper basket, set it backward

position.

See “Using the paper basket and paper

guides” on page 40

Loading cut sheet A3 size or

larger / thick paper

When you load a cut sheet media A3 or larger or thick

paper (0.5 to 1.5 mm), follow the steps below.

Setting direction of the paper is as indicated below.

Paper Direction

A3 or larger cut sheet (with

thickness of 0.5 mm or less)

Vertical

Thick paper with length of 728

mm or less

Vertical

Thick paper with length of 728

mm or longer

Horizontal

Turn on the printer by pressing the button.

Press the button repeatedly until Sheet

appears.

Make sure that the roll paper cover is closed.

Press the button.

Epson Stylus Pro 7700/7710/9700/9710 User’s Guide

Paper Handling

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 186 187

Comments to this Manuals

No comments

Epson Stylus Pro 7710 User's Guide Page 37

Comments to this Manuals

Related products and manuals for Print & Scan Epson Stylus Pro 7710