Epson Stylus Pro 7710 User's Guide download pdf (Page 32)

Insert the paper into the insertion slot. Pull the

paper down through the paper insertion slot so

that it comes out below.

Take care not to fold the edge of the paper, and

insert it so that there is no slack.

If you have difficulty feeding the paper, adjust

the paper suction by pressing the

button. Pull the paper to fit the edge of the

paper to the label position.

Close the roll paper cover.

Press the button.

After a few seconds, the paper moves to the

printing position. When you press the

button, it moves immediately.

If ARE THESE SETTINGS OK? appears on the

LCD panel, press the

or button to select

NO and then press the

button. Set the

media type and paper remaining, and then

press the

button to set the media.

The previous setting appears on the LCD panel.

If the media type and paper remaining are

correct, select YES and then press the

button.

If the edge of the roll paper has folds, press the

button to cut the edge.

When using the paper basket, set it in the

forward or backward position.

If you are using Epson Stylus Pro 9700/9710,

you can also use the optional Auto Take-up

Reel Unit.

See “Using the paper basket and paper

guides” on page 40

See “Using Auto Take-up Reel Unit (For

Epson Stylus Pro 9700/9710 only)” on page

Epson Stylus Pro 7700/7710/9700/9710 User’s Guide

Paper Handling

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 186 187

No comments

Epson Stylus Pro 7710 User's Guide Page 32