Epson Stylus Pro 7710 User's Guide download pdf (Page 80)

Aligning the print head using the

control panel

Select AUTO to correct any head misalignment

automatically to obtain optimum printing results.

If you select MANUAL, you need to check the pattern

and enter the value for alignment.

Note:

You cannot use Plain Paper for automatic alignment.

Setting the paper type and paper thickness

Set the paper type for the Epson special media, and set

the paper thickness for the non-Epson media.

Make sure that the roll paper or one sheet of A4/

Letter size or larger paper is loaded in the printer.

Make sure to set the paper correctly according

to the paper.

See “Paper Handling” on page 28

Press the button to enter the Menu mode.

Press the / button to select HEAD

ALIGNMENT, and then press the

button.

Press the / button to select PAPER

THICKNESS, and then press the

button.

Set the paper type or paper thickness

depending on the paper you set in the printer.

Epson special media:

1. Press the

/ button to select SELECT

PAPER TYPE, and then press the

button.

2. Press the

/ button to select the paper

type you set in the printer, and then press the

button.

Non-Epson media:

1. Press the

/ button to select SELECT

THICKNESS, and then press the

button.

2. Press the

/ button to select a paper

thickness value between 0.1 and 1.5 mm, and

then press the

button.

See the manual that comes with the paper for

the paper thickness.

Press the button twice for non-Epson

media or three times for Epson special media.

To align the print head, see either of the

following section.

“Aligning the print head automatically” on

page 80

“Aligning the print head manually” on page

Aligning the print head automatically

Press the / button to select ALIGNMENT,

and then press the

button.

Select AUTO, and press the button.

Press the / button to select BI-D

2-COLOR, and then press the

button.

Press the button to print the pattern.

The adjustment pattern for output is read by

the sensor and the optimum adjustment value

is registered automatically in the printer.

If you are not satisfied with the result of this

alignment, select BI-D ALL.

If you are not satisfied with the result of the

BI-D ALL alignment, try UNI-D.

You can also align the print head individually

by selecting BI-D #1, BI-D #2, BI-D #3, or

BI-D #4. Select an ink dot size from BI-D #1 to

BI-D #4 depending on the media you use and

the print mode you want to try.

Epson Stylus Pro 7700/7710/9700/9710 User’s Guide

Maintenance

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 186 187

Comments to this Manuals

No comments

Epson Stylus Pro 7710 User's Guide Page 80

Comments to this Manuals

Related products and manuals for Print & Scan Epson Stylus Pro 7710