Epson C82362 User Manual download pdf (Page 57)

User’s Manual

Epson 4000 Hint and Tips

 Service Req. error 00010007-This occurs when the Green tab becomes locked on

the head of the printer. Lift the top lid of the Epson 4000. Locate the head of the

printer and its bright green tab. Pull this green tab out. Turn the printer OFF then

back ON.

 Film curl - If the film curls up, toward the ceiling, the Epson 4000 printer will have a

difficult time recognizing the film. It helps to have the film lay flat or curl down, toward

the floor. FastPOSITIVE

has the correct curl.

 To Remove Jam or Reload film - On the rear of the

printer is the Roller Release Lever. Pull the lever

back, away from the printer. Now you pull out the

film or straighten it. Once the jam is cleared or the

paper is reloaded, push the Release Lever forward.

 Reset - Sometimes it may be necessary to reset the printer. To do this, hold down

the Pause button for 3 seconds.

 Clear horizontal lines through the image - If you have clear horizontal lines running

through the image, a head cleaning will need to be performed. A general head

cleaning can be done through the regular Epson driver. Resolving this issue may

require up to 10 Head Cleaning cycles. If 10 head cleanings do not fix the problem,

run a Power Cleaning. A Power cleaning is done from the interface of the Epson

4000 printer.

 To run a Power Cleaning, your ink cartridges need to be more than 50% full or you

cannot run a Power Cleaning. The status of the printer must say Ready. On the

printer interface, push the right arrow button or Enter button. Push the Up or Down

arrow button until you see Maintenance. Push the right arrow button. Push the Down

arrow button until PWR Cleaning. Push the right arrow button. Push the right arrow

button again. Follow the menu messages.

 Excessive Dot Gain - If you have excessive dot gain in the halftones, run a head

cleaning on the printer.

 Ink button light is solid Red - If the Ink button light is solid red, then one of the ink

cartridges is empty. If any color ink cartridges read empty, you will NOT be able to

print through FastRIP

. We recommend you have extra color cartridges on hand.

 UltraChrome Ink - The Epson 4000 printer comes with UltraChrome (Pigment) ink.

Pigment ink does NOT adhere to non waterproof film. Pigment ink will only work with

waterproof film like FastPOSITIVE

WP film available from US Screen.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 81 82

No comments

Epson C82362 User Manual Page 57