Epson C82362 User Manual download pdf (Page 39)

User’s Manual

Reprinting

If for some reason you need to print another film again,

simply select the Options pull down menu and choose

Output Spooling. Put a check by Enable Output Spooling

and leave it on Concurrent. Click Ok. From the FastRIP

Status Window, select the job and click on Reprint.

Configuring FastRIP

for a Network

These settings would be made on the Host computer of a network, allowing raster data

to be directed to the printer. The available choices are:

LPR (Line Printer Remote)

If you are connected to the printer via an Ethernet

connection, we HIGHLY recommend you set up printer

communications via the LPR setting, NOT the

AppleTalk setting. When you set the printer to the LPR

setting you will need to enter an IP address. To get

your IP address for the printer you must use a utility

from Epson called EpsonNet MacAssist. For more

details see Appendix A.

You can find this utility at:

http://support.epson.com/hardware/printer/option/c82362/index.html

AppleTalk

This option can be used where an AppleTalk network is in use. Click Choose Device.

Select your printer a click Options. Put a check by EPSONLQ2. Click Ok. Click on the

EPSONLQ2 printer and click Select.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 81 82

No comments

Epson C82362 User Manual Page 39