CONFIDENTIAL
Paper roll Character commands GS !
Ver. 10.05 p. 135
[Notes]
■ The character size set by this command is effective for alphanumeric, Kana, multilingual, and user-defined
characters.
■ When the characters are enlarged with different heights on one line, all the characters on the line are
aligned at the baseline.
■ When the characters are enlarged widthwise, the characters are enlarged to the right, based on the left
side of the character.
■ ESC ! can also turn double-width and double-height modes on or off.
■ In standard mode, the character is enlarged in the paper feed direction when double-height mode is
selected, and it is enlarged perpendicular to the paper feed direction when double-width mode is selected.
However, when character orientation changes in 90° clockwise rotation mode, the relationship between
double-height and double-width is reversed.
■ In page mode, double-height and double-width are on the character orientation.
■ The setting of the character size of alphanumeric and Katakana is effective until ESC ! is executed, ESC @
is executed, the printer is reset, or the power is turned off.
■ The setting of the character size of Kanji and multilingual characters is effective until FS ! is executed,
FS W is executed, ESC @ is executed, the printer is reset, or the power is turned off.
[Model-dependent variations] TM-P60
TM-P60
[Peeler model]
With special fonts (24 × 48), enlargement of [width: times 1 to times 4/height: times 1 to times 4]
is possible. Even when 5 times or more is specified for special fonts (24 × 48), they are printed at 4
times enlargement.
Program Example for all printers Print Sample
PRINT #1, CHR$(&H1D);"!";CHR$(17); AAAAA ←
Select quadruple (double-height x double-width)
PRINT #1, "AAAAA"; CHR$(&HA); BBBBB
PRINT #1, CHR$(&H1D);"!";CHR$(0);
PRINT #1, "BBBBB"; CHR$(&HA);
Comments to this Manuals