Epson TM-J2000 Specifications download pdf (Page 161)

100

101

CONFIDENTIAL

Paper roll Print position commands ESC W

Ver. 10.05 p. 161

• When adjusting the printable area of the page mode with <Function 48> of GS ( P, specify the

printable area to be the same as the setting of the printable area by this command after executing

ESC L.

■ The print area and the logical origin set by this command are effective only in page mode.

■ This command setting has no effect in standard mode. If this command is processed in standard mode, the

logical origin and the print area are set, and they are enabled when the printer selects page mode.

■ Even if the horizontal or vertical motion unit is changed after changing the printable area, the setting of

the printable area will not be changed.

■ The settings of this command are effective until FF is executed, ESC @ is executed, the printer is reset, or

the power is turned off.

[Model-dependent variations] TM-J2000/J2100, TM-T90, TM-T88IV, TM-T70, TM-L90, TM-P60

TM-J2000/J2100, TM-T90

The vertical or horizontal motion unit is specified by GS P.

See Function 5 of GS ( E for specifying the paper width.

Program Example for all printers Print Sample

PRINT #1, CHR$(&H1B);"L";← Select page mode

PRINT #1, CHR$(&H1D);"P";CHR$(180);CHR$(180);

PRINT #1, CHR$(&H1B);"W";CHR$(0);CHR$(0);CHR$(0);CHR$(0);CHR$(180);

CHR$(0);CHR$(44);CHR$(1); ← Set print area

PRINT #1, CHR$(&H1B);"T";CHR$(0); ← Select print direction

PRINT #1, "AAAAA"; CHR$(&HA);

PRINT #1, "BBBBB"; CHR$(&HA);

PRINT #1, CHR$(&H1B);"T";CHR$(2); ← Select print direction

PRINT #1, "CCCCC"; CHR$(&HA);

PRINT #1, "DDDDD"; CHR$(&HC); ← Batch print and return to standard mode

AAAAA

BBBBB

CCCCC

DDDDD

by ESC W

area set

←

1 2 ... 156 157 158 159 160 161 162 163 164 165 166 ... 760 761

Comments to this Manuals

No comments

Epson TM-J2000 Specifications Page 161

Comments to this Manuals

Related products and manuals for Print & Scan Epson TM-J2000