Epson TM-J2000 Specifications Page 717
- Page / 761
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
CONFIDENTIAL
Paper roll Printing paper commands FS ( L
Ver. 10.05 p. 717
[Notes for transmission process]
■ Data send operations are performed using Function 34 and 48. When you use the functions, obey the
following rules.
• When the host PC transmits the function data, transmit the next data after receiving the corresponding
data from the printer.
• When operating with a serial interface, be sure to configure operation so that the host computer uses
the printer only when it is READY.
• When operating with a parallel interface, the data sent by this function (starting with Header and
ending with NUL), as with other data, is first stored in the send buffer, then output in sequential order
when the host computer changes to the reverse mode. Note that the send buffer capacity is 99 bytes,
and any data exceeding this volume limit will be lost; therefore, when using this command, it is
important to configure the operation so that the host computer’s change to the reverse mode and the
subsequent status send/receive process is performed quickly.
■ When communication with the printer uses XON/XOFF control with serial interface, the XOFF code may
interrupt the “Header to NUL” data string.
■ The information for each function can be identified to other transmission data according to specific data
of the transmission data block. When the header transmitted by the printer is [hex = 37H/decimal =55],
treat NUL [hex = 00H/decimal =0] as a data group and identify it according to the combination of the
header and the identifier.
Program Example 1 (Two or more labels are printed while peeling off one piece.)
GOSUB *Label.Print ← Send a sheet of print data.
PRINT #1, CHR$(&H1C);"(L";CHR$(2);CHR(0);CHR$(65);CHR$(49); ← Paper feed to label peeling position <Function 65>
I$=INPUT$(1) ← Waiting for inputting (The key is pushed after the label is peeled off.)
PRINT #1, CHR$(&H1C);"(L";CHR$(2);CHR(0);CHR$(67);CHR$(50); ← Putting out the head of the current label <Function 67>
GOSUB *Label.Print ← Send a sheet of print data.
PRINT #1, CHR$(&H1C);"(L";CHR$(2);CHR(0);CHR$(65);CHR$(49); ← Paper feed to label peeling position <Function 65>
I$=INPUT$(1) ← Waiting for inputting (The key is pushed after the label is peeled off.)
PRINT #1, CHR$(&H1C);"(L";CHR$(2);CHR(0);CHR$(67);CHR$(50); ← Putting out the head of the current label <Function 67>
- Paper Roll Printers 1
- PROPRIETARY COMMAND SYSTEM 7
- COMMAND CLASSIFICATION 8
- Real-time Commands 10
- OVERVIEW OF DATA PROCESSING 10
- DEFINITIONS 12
- TM-T88IV SUPPORTED COMMANDS 15
- TM-T90 SUPPORTED COMMANDS 21
- TM-T70 SUPPORTED COMMANDS 27
- TM-L90 SUPPORTED COMMANDS 32
- TM-U220 SUPPORTED COMMANDS 44
- TM-U230 SUPPORTED COMMANDS 48
- TM-P60 SUPPORTED COMMANDS 51
- COMMANDS ARRANGED BY FUNCTION 64
- PRINT COMMANDS 65
- FF (in page mode) 67
- LINE SPACING COMMANDS 82
- CHARACTER COMMANDS 89
- 6/180-inch character spacing 92
- ESC & 99
- CONFIDENTIAL 100
- SETTING COMMAND 104
- ← Black 120
- L pH fn m <Function 48> 128
- L pH fn m 128
- L pH fn m <Function 49> 130
- L pH fn m <Function 50> 132
- L pH fn m a 132
- PANEL BUTTON COMMANDS 139
- PAPER SENSOR COMMANDS 144
- PRINT POSITION COMMANDS 150
- EXECUTING COMMAND 151
- BIT IMAGE COMMANDS 179
- GS ( L GS 8 L 198
- EXECUTING + SETTING 198
- H (m, fn, and [parameters]) 199
- L pH mfn 210
- L pH mfnx y 212
- L pH mfnd1d2 218
- L pH mfnd1d2d3 220
- L pH m fn kc1 kc2 221
- X+1 dX+2 ... dXx2 225
- L + xH ✕ 256) 225
- L pH m fn kc1 kc2 x y 231
- Y+1 ... : 248
- Y+2 ... dk-2 248
- L + xH × 256) 255
- L + xH × 256) = 64 256
- L + xH × 256) = 64, 128 259
- L + yH × 256 266
- L + xH × 256) 270
- MSB LSB MSB LSB 270
- Normal mode 271
- ✻ and GS / 278
- STATUS COMMANDS 287
- Transmits offline status 297
- Transmits ink status A 297
- BAR CODE COMMANDS 331
- MACRO FUNCTION COMMANDS 359
- MECHANISM CONTROL COMMANDS 365
- ESC < 366
- MISCELLANEOUS COMMANDS 378
- DLE DC4 (fn = 1) 385
- DLE DC4 (fn = 2) 388
- DLE DC4 (fn = 7) 391
- DLE DC4 (fn = 8) 396
- L pH fn n c t1 t2 405
- L pH fn a b n c t1 t2 406
- L pH fn m d1d2d3d4 430
- L pH fn m d 433
- GS ( K <Function 48> 445
- GS ( K <Function 49> 448
- GS ( K <Function 50> 451
- GS ( K <Function 97> 453
- ← <Function 48> 455
- L + wyH × 256) = 458
- × 256) = 0] 458
- L + pH × 256) 459
- Transmits printer ID 473
- GS z 0 (TM-L90 w/ Peeler) 498
- KANJI COMMANDS 501
- Select JIS code system 504
- Specify Kanji mode 504
- Cancel Kanji mode 504
- FS & 505
- TWO DIMENSION CODE COMMANDS 525
- GS ( k <Function 065> 533
- L pH cn fn n 533
- GS ( k <Function 066> 535
- GS ( k <Function 067> 536
- GS ( k <Function 068> 538
- GS ( k <Function 069> 540
- L pH cn fn m n 540
- GS ( k <Function 070> 543
- GS ( k <Function 081> 546
- L pH cn fn m 546
- GS ( k <Function 082> 549
- GS ( k <Function 165> 552
- L pH cn fn n1 n2 552
- GS ( k <Function 167> 553
- GS ( k <Function 169> 555
- GS ( k <Function 181> 559
- GS ( k <Function 182> 562
- GS ( k <Function 265> 565
- GS ( k <Function 281> 567
- GS ( k <Function 282> 570
- GS ( k <Function 367> 573
- GS ( k <Function 371> 574
- GS ( k <Function 381> 577
- GS ( k <Function 382> 579
- GS ( k <Function 467> 582
- GS ( k <Function 471> 583
- GS ( k <Function 472> 584
- GS ( k <Function 481> 594
- GS ( k <Function 482> 600
- CUSTOMIZE COMMANDS 604
- L + nH × 256) bytes 609
- L pH m fn b c1 c2 615
- L pH mfnb 620
- L pH m fn b d1 d2 d3 624
- L pH fn d1 d2 631
- L pH fn d1 d2 d3 632
- 31 50 50 50 50 50 50 50 49 635
- L pH fn a <Function 4> 646
- L pH fn a 646
- L + nH × 256) 651
- 70 Light 655
- 85 Medium 655
- 100 Dark 655
- L + nH × 256) Print density 655
- L + nH × 256) Print control 657
- L + nH × 256) Print speed 658
- L pH fn a <Function 6> 663
- L pH fn a 663
- L pH fn ad1d2 666
- MSB LSB MSB LSB 672
- L pH fn c1 c2 673
- L pH fn a d1...dk 674
- L pH 0B a d1...dk 674
- L pH 11 a d1...dk 674
- L pH 0B a 678
- L pH 11 a 678
- L pH fn d1 d2 d3 685
- L pH fn n 692
- L pH fn m 701
- COUNTER PRINTING COMMANDS 704
- PRINTING PAPER COMMANDS 715
- L pH fn n 729
- FS ( L <Function 48 > 732
- FS ( L <Function 65 > 737
- FS ( L <Function 66 > 740
- FS ( L <Function 67 > 742
- CHARACTER CODE TABLES 746
- USING BIT VALUE TABLES 760
Related products and manuals for Print & Scan Epson TM-J2000
Print & Scan Epson TM-C3400 User Manual
(20 pages)
(20 pages)
Print & Scan Epson AcuLaser M2000DN User's Guide
(169 pages)
(169 pages)
Print & Scan Epson MP-2100 TH User Manual
(36 pages)
(36 pages)
Print & Scan Epson GP-M830 User Manual
(118 pages)
(118 pages)
Print & Scan Epson PRO4000 User Manual
(12 pages)
(12 pages)
Print & Scan Epson Stylus Pro 4400 User Manual
(426 pages)
(426 pages)
Print & Scan Epson TM-P60 User Manual
(4 pages)
(4 pages)
Print & Scan Epson Stylus Pro 10600 - UltraChrome Ink - Stylus Pro 10600 Print Engine User Manual
(6 pages)
(6 pages)
Print & Scan Epson TM-U210B Specifications
(127 pages)
(127 pages)
Print & Scan Epson EMP 600 Owner's Manual
(122 pages)
(122 pages)
Print & Scan Epson AL-M200 Series User Manual
(240 pages)
(240 pages)
© 2020, manymanuals.com. All rights reserved. | 2.600 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals