Epson TM-J2000 Specifications Page 377

  • Download
  • Add to my manuals
  • Print
  • Page
    / 761
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 376
CONFIDENTIAL
Paper roll Mechanism control commands GS V
Ver. 10.05 p. 377
TM-T88IV
The vertical motion unit is specified by GS P.
The distance from print head to autocutter is about 15 mm {0.59 inch}.
After executing a paper cut, a paper feed for 1 mm {14/360 inches} before starting the next
printing can provide the best printing result without uneven paper feeding.
TM-T70
The vertical motion unit is specified by GS P.
The distance from print head to autocutter is about 13 mm {0.51 inch}.
After executing a paper cut, a paper feed for 1 mm {other than Japanese specifications:7/180
inches/Japanese specification:8/203 inches} before starting the next printing can provide the best
printing result without uneven paper feeding.
TM-U230
The vertical motion unit is approximately 0.176 mm {1/144 inch}. This equals 1/2 dot pitch.
When using Function C, the basic unit is approximately 4 mm {0.16 inch}. The top margin is
approximately 27 mm {1.06 inches}.
TM-U220
Uneven pitch may occur with subsequent paper feed due to the operation of the autocutter. It is
recommended to feed approximately 2.116 mm or more for printing the next line to prevent “dot
displacement after cutting.”
Since TM-U220D is not equipped with an autocutter, it can use only Function B. The printer feeds
paper for [manual cutter position + (n × approximately 0.176 mm {1/144 inch})].
The cutting shapes of (m = 0,48) and (m = 1,49) are the same as the cutting shape of (m = 65)
and (m = 66). The setting is partial cut (one point is left) when the printer is shipped.
The distance from print head to autocutter is about 27 mm {1.06 inches} in the TM-U220A and
TM-U220B. The distance from print head to emergency cutter is about 22.1 mm {0.87 inch} in
TM-U220D.
Page view 376
1 2 ... 372 373 374 375 376 377 378 379 380 381 382 ... 760 761

Comments to this Manuals

No comments