Epson TM-J2000 Specifications Page 162

  • Download
  • Add to my manuals
  • Print
  • Page
    / 761
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 161
CONFIDENTIAL
Paper roll Print position commands ESC W
Ver. 10.05 p. 162
TM-T88IV
The vertical or horizontal motion unit is specified by GS P.
The maximum vertical motion unit that can be set differs according to the printing control (single
color/two-color) setting. Refer to GS ( E <Function 5> for specifying printing control (single-color/
two-color).
When single-color printing control is selected : 234.35 mm {3324/360 inches}
When two-color printing control is selected : 117.26 mm {1662/360 inches}
TM-T70
The vertical or horizontal motion unit is specified by GS P.
TM-L90
The vertical or horizontal motion unit is specified by GS P.
When a set value of the paper layout (horizontal and vertical size of the print area) is smaller than
the print area (initial value of this command), it is not possible to print in the area where the
paper layout (horizontal and vertical size of the print area) is exceeded.
See Function 5 of GS ( E for specifying the paper width and paper (monochrome paper or two-
color paper).
See Functions 49 and 50 of GS ( E for the paper layout (receipt/label paper, horizontal and vertical
size of print area).
TM-P60
[Peeler model]
The maximum value and default value for the horizontal length changes according to the paper
layout (horizontal layout). See the FS ( L <Function 33> model information for details.
The maximum value and default value for the vertical length changes according to the GS ( P
<Function 48> setting value. See the GS ( P <Function 48> model information for details.
[Other than peeler model]
See Function 5 of GS ( E for specifying the paper width.
Page view 161
1 2 ... 157 158 159 160 161 162 163 164 165 166 167 ... 760 761

Comments to this Manuals

No comments