Epson TM-J2000 Specifications Page 177

  • Download
  • Add to my manuals
  • Print
  • Page
    / 761
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 176
CONFIDENTIAL
Paper roll Print position commands GS \
Ver. 10.05 p. 177
GS \
EXECUTING COMMAND
[Name] Set relative vertical print position in page mode
[Format] ASCII GS \ nL nH
Hex 1D 5C nL nH
Decimal 29 92 nL nH
[Range] –32768 (nL + nH × 256) 32767
[Default] None
[Printers not featuring this command] TM-U230, TM-U220
[Description] In page mode, moves the vertical print position to (nL + nH × 256) × (vertical or horizontal motion unit) from
the current position.
[Notes]
This command is enabled only in page mode. If this command is processed in standard mode, it is ignored.
The printer ignores any setting that exceeds the print area set by ESC W.
A positive number specifies movement downward, and a negative number specifies movement upward. N
pitch movement downward: (nL + nH × 256) = N. Use the complement of N for setting N pitch movement
upward: (nL + nH × 256) = 65536 – N.
The horizontal or vertical motion unit is used for the print direction set by ESC T.
When the starting position is set to the upper left or lower right of the print area using ESC T, the
vertical motion unit is used.
When the starting position is set to the upper right or lower left of the print area using ESC T, the
horizontal motion unit is used.
Even if vertical or horizontal motion unit is changed after changing the print position, the setting of print
position will not be changed.
“\” is corresponds to “\” in JIS code set.
[Model-dependent variations] TM-J2000/J2100, TM-T90, TM-T88IV, TM-T70, TM-L90, TM-P60
Page view 176
1 2 ... 172 173 174 175 176 177 178 179 180 181 182 ... 760 761

Comments to this Manuals

No comments