Epson TM-J2000 Specifications Page 738

  • Download
  • Add to my manuals
  • Print
  • Page
    / 761
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 737
CONFIDENTIAL
Paper roll Printing paper commands FS ( L
Ver. 10.05 p. 738
Models with the peeling function will be in the label removal waiting status when Function 65 is executed.
This status continues during label removal and printer reset or label removal and power off. The label
removal waiting status can be checked by DLE EOT (n = 8, a = 3: Peeler status).
[Model-dependent variations] TM-L90, TM-P60
TM-L90
The following operation is executed according to a set value of the paper layout.
*Set the paper layout (sb, se) by the Function 49 of GS ( E.
TM-L90 with Peeler:
When the peeling issuing mode is selected, the status changes to label removal standby when this
function is executed. You can check the label removal standby status with DLE EOT (n = 8, a = 3:
Peeler status) or the basic ASB status. When the label removal is checked by pressing the FEED
button, the printer is in the waiting status for the FEED button to be pressed. The waiting status
for the FEED button to be pressed can be checked by the basic ASB status or DLE EOT (n = 1: Printer
status) “Online recovery waiting status.”
Switching between the peeling issuing mode and the continuous issuing mode can be done with a
slide switch on the printer. This switch can be used when the roll paper cover is open.
TM-P60
This function operates when (sm = "1", "2") is specified for the layout reference.
With the operation of this function, paper feed is executed until the paper layout "eject
reference" reaches the mechanical peeling position.
Set value of paper layout Operation
Paper layout (sbse) is less than 24 mm {0.94 inch} or
Paper layout (sbse) is more than or 29 mm {1.1 inches}
Execute the paper feed to the manual cutter
position by “Cutting position” (se) specified by the
paper layout.
Paper layout (be) is between 24 mm {0.94 inch} and
29 mm {1.1 inches}
Execute the paper feed by the amount which
corresponds to paper layout (sbse).
Page view 737
1 2 ... 733 734 735 736 737 738 739 740 741 742 743 ... 760 761

Comments to this Manuals

No comments