Epson TM-J2000 Specifications Page 490

  • Download
  • Add to my manuals
  • Print
  • Page
    / 761
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 489
CONFIDENTIAL
Paper roll Miscellaneous commands GS g 2
Ver. 10.05 p. 490
When you use this command, follow these rules.
When the host PC transmits the function data, transmit the next data after receiving the corresponding
data (the header ~ NULL) from the printer.
With serial interface printers, be sure to use this function when the host is in the READY state.
With a parallel interface, the data sent by this function [Header ~ NUL], as with other data, is first
stored in the send buffer, then output in sequential order when the host computer changes to the
reverse mode. Note that the send buffer capacity is 99 bytes, and any data exceeding this volume limit
will be lost; therefore, when using this command, it is important to configure the operation so that the
host computer’s change to the reverse mode and the subsequent status send/receive process is
performed quickly.
Types of maintenance counters differ, depending on the printer models.
When the host is communicating with the printer by XON/XOFF control, the XOFF code might interrupt
[Header ~ NUL].
The maintenance counter data can be identified to other transmission data according to specific data of
the transmission data block. When the header transmitted by the header is [hex = 5FH/decimal = 95], treat
NUL [hex = 00H/decimal =0] as a data group and identify it according to the header.
[Model-dependent variations] TM-J2000/J2100, TM-T90, TM-T88IV, TM-T70, TM-L90, TM-P60
Program Example
PRINT #1, CHR$(&H1D);”g2”;CHR$(0);CHR$(11);CHR$(0); Transmit a counter value of print characters
Page view 489
1 2 ... 485 486 487 488 489 490 491 492 493 494 495 ... 760 761

Comments to this Manuals

No comments