CONFIDENTIAL
Paper roll Customize commands GS ( E
Ver. 10.05 p. 677
TM-P60
DIP switch for setting communication condition is not supported. 3 baud rates are selectable.
[“9600 “, “19200 “, “38400 “]
TM-U220
• The serial communication setting is also specified by DIP switch.
• There are 2 series (types) of this printer. They are identified on a sticker near the DIP switch on the main
board. One is “STD,“ the other is “US.“ The DIP switch assignment is different between the “STD“ series
and the “US“ series. The DIP switch selects either DIP switch or this function to specify the serial
communication setting. The selecting DIP switch is shown in following table. When the DIP switch is ON, a
setting value of this function is enabled. Turn off the printer before changing DIP switch settings.
5 baud rates are selectable by this command.
[“1200”, “2400 “,“4800 “, “9600 “, “19200 “]
Setting of this function can be changed by “Memory switch setting mode” by the panel switch
operation.
Printer series DIP switch
Type B, D with “STD” sticker or Type A [SW 2-4]
Type B, D with “US” sticker [SW 2-8]
Comments to this Manuals