Epson TM-J2000 Specifications Page 694

  • Download
  • Add to my manuals
  • Print
  • Page
    / 761
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 693
CONFIDENTIAL
Paper roll Customize commands GS ( E
Ver. 10.05 p. 694
(*1) “Type of information” transmits the value n converted into character data expressed by decimal numbers
from the high order end. Example: When the setting of “Type of information” is (n = 64), it is 2-byte data of
“64” [Hexadecimal = 36H, 34H/Decimal = 54, 52]. When the setting of “Type of information” is (n = 80), it is
2-byte data of “80” [Hexadecimal = 38H, 30H/Decimal = 56, 48].
(*2) “Layout information” is transmitted sequentially, converting the character data into decimal data.
Example: When “Layout basis” is “64,” it is 2-byte of ”64” [Hexadecimal = 36H, 34H/Decimal = 54, 52]
Setting value (n = 64) is specified as the type of information, transmit data are as follows:
•(sa ~ sh) of the layout information corresponds to (sa) and (sb) ~ (sh) of Function 49.
“Setting value” means the paper layout information: setting value of Function 49 and GS(A ( m =
64), stored in the non-volatile memory.
The paper layout information that is not stored in non-volatile memory cannot be transmitted. In this
case, only the separator is transmitted.
Transmit data when effect value is specified (n = 80) as the type of information are as follows:
•(sa ~ sh) of the layout information corresponds to (sa) of Function 49 and each element (sb) ~ (sh) of
vertical and horizontal layout illustrated in the Function 49.
“Effect value” means the value used in actual operation, calculated based on the following values (in
one dot units.)
•Paper layout information (setting value of Function 49 and GS(A (auto set of the paper layout)),
stored in the non-volatile memory.
•Setting value of the paper width.
•Regulated value by the mechanical structure (minimum pitch, left and right margin of the print area).
•The paper layout information that is not used in actual print operation cannot be transmitted. In this
case, only the separator is transmitted.
Type of information (n)
Transmit data
Hex Decimal Data
Setting value (n = 64) 36H, 34H 54, 52 2 bytes
Effect value (n = 80) 38H, 30H 56, 48 2 bytes
Page view 693
1 2 ... 689 690 691 692 693 694 695 696 697 698 699 ... 760 761

Comments to this Manuals

No comments