Epson TM-J2000 Specifications Page 737

  • Download
  • Add to my manuals
  • Print
  • Page
    / 761
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 736
CONFIDENTIAL
Paper roll Printing paper commands FS ( L
Ver. 10.05 p. 737
FS ( L <Function 65 >
[Name] Feed paper to the label peeling position
[Format] ASCII FS ( L pL pH fn m
Hex 1C284C020041m
Decimal 28 40 76 2 0 65 m
[Range] (pL + pH × 256) = 2 (pL = 2, pH = 0)
m = 48, 49
fn = 65
TM-L90: with Peeler
m = 48 [When the peeling issuing mode is selected]
m = 48, 49 [When the continuous issuing mode is selected]
[Models other than the above]
m = 48, 49
TM-P60: m = 48, 49
[Description] Feeds paper to the label peeling position.
[Notes]
Please use this function by using “the first state of the line” in standard mode.
This function is used only with label paper.
The paper feed operation ends when no paper is detected in the paper feed to the label peeling position.
[Position information A] transmitted by Function 48 becomes (bit 0 = 1) when this function is processed.
Moreover, the print area of the label paper or black mark paper if there is a print start position right under
the label peeling position becomes “current label.”
“Label peeling position” is the position where the label can be peeled off by hand. Details are different
depending on the model.
m Function
48 Feeds paper to the label peeling position. However, if the paper is in standby at the
label peeling position, the printer does not feed.
49 Feeds paper to the label peeling position. However, if the paper is in standby at the
label peeling position, the printer feeds paper to the next label peeling position.
Page view 736
1 2 ... 732 733 734 735 736 737 738 739 740 741 742 ... 760 761

Comments to this Manuals

No comments