CONFIDENTIAL
Paper roll Status commands GS a
Ver. 10.05 p. 316
• When the cover is open, the status of the roll paper end sensor (bit 2, 3) retains the value when the cover
was closed immediately before.
■ Basic fourth byte (paper sensor information)
• Bits 0 and 2 indicate the following status:
■ Fourth byte (paper sensor information)
■ Bit 0: When the continuous issuing is selected, this bit is always 0.
■ Bit 2: When the peeling issuing mode is selected, this bit is changed during paper feeding or
when a label is in the peeling position. When a label removal is checked by pressing the paper
feed button, this bit may be incorrect. When the continuous issuing mode is selected, this bit is
always 1.
TM-L90 Models without Peeler
The default value is set by Msw 1-3.
Bit Binary Hex Decimal Status for ASB
0 0 00 0 Not waiting for a label to be
removed
... how to use
this table
1 01 1 Waiting for a label to be
removed
1— — — Reserved
2 0 00 0 Paper present in label peeling
detector
1 04 4 No paper present in label
peeling detector
3— — — Reserved
4 0 00 0 Not used. Fixed to Off.
5,6 — — — Reserved
7 0 00 0 Not used. Fixed to Off.
Comments to this Manuals