Epson TM-J2000 Specifications Page 642

  • Download
  • Add to my manuals
  • Print
  • Page
    / 761
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 641
CONFIDENTIAL
Paper roll Customize commands GS ( E
Ver. 10.05 p. 642
The setting of [Msw8-2] affects the recovery operation from the paper layout error. Memory switch [Msw8-2]
is supported differently, depending on the firmware version.
Setting of [Msw 8-3] is supported differently, depending on the firmware version.
Setting of [Msw 8-4] affects the performance as follows:
Executing “Automatic paper layout setting mode function (m = 64)” of GS ( A
8-3 48 PAPER LED is on when a paper near end is detected
49 PAPER LED is off when a paper near end is detected
8-4 48 Sets the maximum length of automatic paper measurement to 160 mm
49 Sets the maximum length of automatic paper measurement to 300 mm
8-5 48 Spacing of both sides for bar code: not inserted
49 Spacing of both sides for bar code: inserts a space
8-6 48 Perform paper feed to the print starting position when power is turned on
49 Not perform paper feed to the print starting position when power is turned on
8-7 50 Reserved
8-8 48 Roll paper cover open during printing: automatic recoverable error
49 Roll paper cover open during printing: recoverable error
[Msw8-2] Recovery operation from error
OFF Can recover from the error by opening/closing the printer
cover or by executing DLE ENQ. While the printer recovers
from the error, paper layout is measured automatically
and paper is fed to the label print starting position. If the
paper layout is stored in the non-volatile memory, it will
be rewritten. Afterwards, the printer operates following
the paper layout previously measured.
ON Can recover by executing DLE ENQ. While the printer
recovers from the error, paper is fed to the label print
starting position. The paper layout stored in the non-
volatile memory will not be changed. Change the setting
of the paper layout stored in the non-volatile memory so
that it matches the currently used paper layout. See
function 49 of this command for setting the paper layout.
Page view 641
1 2 ... 637 638 639 640 641 642 643 644 645 646 647 ... 760 761

Comments to this Manuals

No comments