Epson TM-J2000 Specifications Page 236

  • Download
  • Add to my manuals
  • Print
  • Page
    / 761
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 235
CONFIDENTIAL
Paper roll Bit-image commands GS ( L GS 8 L
Ver. 10.05 p. 236
See Function 49 of GS ( E for the origin of layout (paper layout is not used / top of black mark / bottom of
label).
(*1) The maximum print area in the horizontal direction is defined by the paper width.
A horizontal maximum print area is decided according to the width of the paper.
TM-P60
The dot density and the maximum print area are described in the next tables (dpi: number of dots per 25.4
mm).
“Vertical” is in the direction of paper feeding and “horizontal” is perpendicular (at right angles) to the
direction of paper feeding.
The maximum print area in the vertical direction is information used when graphics are printed with the page
mode selected (for the starting position specified with ESC T is “Upper right” or “Lower left”). In this case,
graphics rotated by 90 degrees or 270 degrees are printed.
Horizontal Vertical
Maximum print area (dot)(*1)
Maximum print
area (dot)Scaling Dot density
When paper layout is not used
or top of black mark is selected
When the bottom
of label is selected Dot density
× 1 203 dpi 256 to 576 224 to 560 203 dpi 738
× 2 203/2 dpi 128 to 288 112 to 280 203/2 dpi 369
Paper width When (x = 1) is specified. When (x = 2) is specified.
When paper
layout is not used
or top of black
mark is selected
80 to 78 mm 576 dot 288 dot
77 to 38 mm (256 + (paper width – 38) × 8) dot (256 + (paper width – 38) × 8 / 2) dot
When the bottom
of label is
selected
80 mm 560 dot 280 dot
79 to 38 mm (224 + (paper width – 38) × 8) dot (224 + (paper width – 38) × 8 / 2) dot
Page view 235
1 2 ... 231 232 233 234 235 236 237 238 239 240 241 ... 760 761

Comments to this Manuals

No comments