CONFIDENTIAL
Paper roll Customize commands GS ( C
Ver. 10.05 p. 610
GS ( C
EXECUTING + SETTING
[Name] Edit NV user memory
[Printers not featuring this command] TM-T88IV, TM-U230
[Description] Edits the data in the NV user memory.
• Function code fn specifies the function.
• pL, pH specifies (pL + pH × 256) as the number of bytes after pH (m, fn, b, [c1 c2], and [d1...dk]).
• The other parameters are explained under each of the functions.
[Notes]
■ The command function is defined by the function code (fn). The command operation differs, depending
on the function.
■ The NV user memory area is especially provided for storing character data in the non-volatile memory built
into the printer.
■ The NV user memory data configuration is as follows: key code + data + terminator. This unit is called a
record.
• A record is one data processing unit in the NV user memory. It is controlled by a key code.
• The key code is a 2-byte ID code used to identify records and is created with parameters c1, c2 in the
command (Character codes: Hexadecimal = 20H – 7EH/Decimal = 32 – 126.)
fn Function No. Function name
0, 48 Function 0 Delete the specified record
1, 49 Function 1 Store the data in the specified record
2, 50 Function 2 Transmit the data in the specified record
3, 51 Function 3 Transmit capacity of the NV user memory currently being used
4, 52 Function 4 Transmit the remaining capacity of the NV user memory
5, 53 Function 5 Transmit the key code list
6, 54 Function 6 Delete all data in the NV user memory
Comments to this Manuals