CONFIDENTIAL
Paper roll Customize commands GS ( E
Ver. 10.05 p. 675
[Description] Sets the configuration item for the serial interface specified by a to the values specified by d1...dk.
• Transmission speed (a = 1) is specified by number. The baud rate that can be specified differs,
depending on the printer model.
Example: When defining 19200 bps: 5 bytes as “19200” (Hexadecimal = 31H, 39H, 32H, 30H, 30H / Decimal
= 49, 57, 50, 48, 48)
• Parity (a = 2) is specified by d as follows:
• Flow control (a = 3) is specified by d as follows:
• Data length (a = 4) is specified by d as follows:
[Notes]
■ It is recommended that the DIP switch be used to change communication condition.
a Configuration item
1 Transmission speed
2 Parity
3 Flow control
4 Data length
d Function
48 Select no parity
49 Select odd parity
50 Select even parity
d Function
48 Select Flow control of DTR/DSR
49 Select Flow control of XON/XOFF
d Function
55 Select 7 bits length
56 Select 8 bits length
Comments to this Manuals