CONFIDENTIAL
Paper roll Bit-image commands GS ( L GS 8 L
Ver. 10.05 p. 225
■ Note that it is not possible to create definitions for both NV graphics data (this command) and NV bit
image data (FS q). NV bit image data definitions are deleted when this command is used.
■ The relationship between NV graphics data (raster format) and print results is shown in the table below.
[Model-dependent variations] TM-J2000/J2100, TM-T90, TM-L90, TM-T88IV, TM-T70, TM-P60
TM-J2000/J2100
This printer is equipped with a print head configured in column format, which makes it faster to
define data using Function 68 (column format) than with this function.
The [data value (k) + control information data value (32 bytes)] area of the NV graphics data
domain is used when this function is executed.
TM-T90, TM-L90
For specifying paper (2-color/single-color), see Functions5 of GS ( E.
The [data value (k) + control information data value (24 bytes)] area of the NV graphics data
domain is used when this function is executed.
d1 d2 ... dX
dX+1 dX+2 ... dXx2
::...:
... dk-2 dk-1 dk X = (xL + xH ✕ 256)
MSB LSB MSB LSB MSB LSBMSB LSB
Comments to this Manuals