Epson TM-J2000 Specifications Page 390

  • Download
  • Add to my manuals
  • Print
  • Page
    / 761
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 389
CONFIDENTIAL
Paper roll Miscellaneous commands DLE DC4 (fn = 2)
Ver. 10.05 p. 390
The power-off notice can be differentiated from other transmission data according to specific data of the
transmission data block. When the header transmitted from the printer is [Hex=3BH/Decimal=59], treat
NUL [hex = 00H/decimal =0] as a data group and identify it according to the combination of the header
and the identifier.
[Model-dependent variations] TM-J2000/J2100, TM-T90, TM-L90, TM-T88IV, TM-T70, TM-P60
TM-J2000/J2100, TM-T90, TM-L90
The BUSY condition is selected by memory switch 1-3.
While processing a set up of power-off, the POWER LED blinks fast and changes to slow blinking
after the printer transmits a power-off notice. Be sure that the POWER LED is blinking slowly; then
turn off the power switch.
When DIP switch [SW1-1] is ON, the power will not be turned off by this command. Be sure that
the power is turned off by an operator.
TM-T88IV, TM-T70
The BUSY condition is selected by memory switch 2-1.
The power will not be turned off by this command. Be sure that the power is turned off by an
operator.
TM-P60
When memory switch [Msw8-1] is OFF, the power-off notice is not transmitted.
This command processes power-off disconnection.
Program Example
PRINT #1, CHR$(&H10);CHR$(&H14);CHR$(2);CHR$(1);CHR$(8);
GOSUB *RECEIVE Confirmation “power off notice“
Page view 389
1 2 ... 385 386 387 388 389 390 391 392 393 394 395 ... 760 761

Comments to this Manuals

No comments