CONFIDENTIAL
Paper roll Printing paper commands FS ( L
Ver. 10.05 p. 728
The horizontal size of the printable area, specified with horizontal layout (sf) and layout reference
(sm) is as shown in the table below.
You can also specify transmission of the effective value and acquire the dot count of the printable
area with <Function 34> of this command.
• The left edge of the printing area when the layout reference is specified (sm = "1," "2"), is the position of
the 17th dot when (sm = "0," "3") is specified.
The operation of the commands shown below differ according to the layout reference (sm)
specified
(sf) setting
value
Horizontal size of the printable area
When (sm = "0," "3") is specified When (sm = "1," "2") is specified
"600" to "590" 54.0 mm (432 dots) 50.0 mm (400 dots)
"589" to "585" 53.0 mm (424 dots) 49.0 mm (392 dots)
"584" to "575" 52.5 mm (420 dots) 48.5 mm (388 dots)
"574" to "290" (int (sf ÷ 10) - 5) mm
(int (sf ÷ 10) - 5) × 8 dots
(int (sf ÷ 10) - 9) mm
(int (sf ÷ 10) - 9) × 8 dots
Command sm = “0” sm = “1” sm = “2” sm = “3”
FS ( L
<Function 65>
No Yes Yes No
FS ( L
<Function 66>
No Yes Yes Yes
FS ( L
<Function 67>
No Yes Yes Yes
GS V
<Function B>
Yes No No No [Yes: Operates / No: Does not
operate]
Comments to this Manuals