CONFIDENTIAL
Paper roll Status commands GS a
Ver. 10.05 p. 320
• Selecting the continuous issuing mode
TM-P60 Models without Peeler
The function of Bit 0 of parameter (n) is not supported. Specify 1 to bit 0 of n or bits of
“Reserved.”
■ First byte (printer information)
• Bit 2 status is as follows:
■ Basic second byte (printer information)
• Bits 0 and 2 of the second byte are not supported.
■ Basic third byte (paper sensor information)
• Bits 0 and 1 of the third byte are not supported.
• When the cover is open, the status of the roll paper end sensor (bit 2, 3) retains the value when the cover
was closed immediately before.
2 If the paper roll cover was open in Step 1, close the paper roll cover.
3 Press the peeler changeover lever. The peeler holder is raised.
4 Close the peeler cover.
Step Operation
1 Press the cover open button, and open the peeler cover.
2 If the paper roll cover was open in Step 1, close the paper roll cover.
3 Fold up the peeler holder.
4 Close the peeler cover.
n:
Bit Binary Hex Decimal Function
2 0 00 0 Does not go to offline by low battery.
1 04 4 Offline by low battery.
Comments to this Manuals