CONFIDENTIAL
Paper roll Miscellaneous commands GS ( K
Ver. 10.05 p. 448
GS ( K <Function 49>
[Name] Select the print density
[Format] ASCII GS ( K pL pH fn m
Hex 1D 28 4B 02 00 31 m
Decimal 2949752048m
[Range] (pL + pH × 256) = 2 (pL = 2, pH = 0)
fn = 49
TM-T90:250 ≤ m ≤ 255, 0 ≤ m ≤ 6
TM-L90:250 ≤ m ≤ 255, 0 ≤ m ≤ 8
[Default] m = 0
[Description] Selects the print density by m.
• The specification of each print density differs, depending on the printer model. See model-dependent
variations.
[Notes]
■ When a standard mode is selected, all the data in a line is printed in the same density.
■ When a page mode is selected, all the data printed collectively by FF or ESC FF is printed in the same
density.
[Model-dependent variations] TM-J2000/J2100, TM-T88IV, TM-T70, TM-T90, TM-L90, TM-P60
TM-J2000/J2100, TM-T88IV, TM-T70, TM-P60
This printer does not support this function.
m Function
128 - 255 Pale density
0 Standard density [setting value of GS(E Function 5
customize value (a = 5) ]
1 - 127 Strong density
Comments to this Manuals