CONFIDENTIAL
Paper roll Status commands GS a
Ver. 10.05 p. 317
■ Basic second byte (printer information)
• If the cause of the recoverable error (bit 2) is the paper layout error, the printer can recover from the error
by opening/closing the roll paper cover or by the DLE ENQ command or pressing the paper feed button
only when memory switch Msw8-2 is OFF. See Function 3 of GS E.
■ Basic third byte (paper sensor information)
• When the cover is open, the status of the roll paper end sensor (bit 2, 3) retains the value when the cover
was closed immediately before.
TM-T88IV
The default value is set by DIP switch 2-1.
■ Second byte (printer information)
• Bits 0, 1, and 2 of the second byte are undefined.
■ Third byte (paper sensor information)
• When the cover is open, the status of the roll paper end sensor (bit 2, 3) retains the value when the cover
was closed immediately before.
TM-T70
The default value is set by DIP switch 2-1.
■ Second byte (printer information)
• Bits 0, 1, and 2 of the second byte are undefined.
■ Third byte (paper sensor information)
• When the cover is open, the states of the roll paper near end sensor (bit 0, 1) and the roll paper end sensor
(bit 2, 3) retain the values when the cover was closed immediately before.
Comments to this Manuals