Epson TM-J2000 Specifications download pdf (Page 376)

100

101

CONFIDENTIAL

Paper roll Mechanism control commands GS V

Ver. 10.05 p. 376

TM-L90 models without Peeler:

The vertical motion unit is specified by GS P.

The cutting shapes of (m = 0,48) and (m = 1,49) are the same as the cutting shape of (m = 65)

(m = 66), (m = 103) and (m = 104). The setting is full cut when the printer is shipped. It can be

changed to partial cut (one point is left) setting by dealer’s option. Don’t use Function <D> after

changing the setting to partial cut.

Whether the operation is a full cut or a partial cut (one point is left) is determined by the

installation position of the autocutter. When selecting paper layout (origin of layout) as “bottom

of a label” or “top of a black mark,” use this command immediately after executing the paper

feed to the cutting position. The distance from print head to autocutter is about 14 mm {0.55

inch}. The top margin is about 3 mm {0.12 inch} when executing Function <D>.

After executing a paper cut, a paper feed for 1 mm {16/406 inches} before starting the next

printing can provide the best printing result without uneven paper feeding. If the printer is left

until the next printing after executing a paper cut, feeding paper more than 1 mm {16/406 inches}

can avoid a paper jam inside the autocutter.

TM-P60

The vertical motion unit is approximately 0.125 mm {1/203 inches}. This value equals one dot pitch.

With Peeler

This command operates when paper layout [layout reference (sm = "0")] is specified. See FS ( L

<Function 33> for paper layout.

This printer does not have an autocutter, so the paper is not cut. After executing [manual cutter

position + (n × about 0.125 mm {1/203 inch})] paper feed with <Function B>, pull the paper and cut

it.

TM-P60 models without Peeler

The cutting shapes of (m = 0,48) and (m = 1,49) are the same as the cutting shape of (m = 65)

and (m = 66). The setting is partial cut (one point is left uncut). The distance from print head to the

autocutter is about 6.4 mm.

1 2 ... 371 372 373 374 375 376 377 378 379 380 381 ... 760 761

Comments to this Manuals

No comments

Epson TM-J2000 Specifications Page 376

Comments to this Manuals

Related products and manuals for Print & Scan Epson TM-J2000