CONFIDENTIAL
Paper roll Counter printing commands GS C ;
Ver. 10.05 p. 711
[Notes]
■ The internal counter value which counts the repetition number of printing by processing this command
is “0.”
■ The value of the counter is updated when executing GS c by following the counter mode set by this
command.
■ In count-up mode, the counter value exceeds the maximum counter value (sb), the printer restart
counting from the minimum counter value (sa).
■ In count-down mode, the counter value is below the minimum counter value (sb), the printer restart
counting from the maximum counter value (sa).
■ counter value and sa is the maximum counter value.
■ In count-stop mode, the counter value is not changed by GS c.
■ The settings of a counter mode set by GS C 1 and the counter value set by GS C 2 are disabled by
processing this command.
■ sa, sb, sn, sr, and sc specify a value using a decimal character string, respectively.
■ sa, sb, sn, sr, and sc can be omitted (“;“ which separates an argument, cannot be omitted). Setting
value for the omitted argument is not changed.
Example:
When changing only a stepping amount for a count-up or count-down and a counter value, the setting
value is [GS C ; ; ; 5 ; ; 100 ;].
■ The counter value range (maximum value and minimum value), stepping amount of incrementing or
decrementing of a counter value, and repetition number of printing are effective until GS C 1 is executed,
ESC @ is executed, the printer is reset, or the power is turned off.
■ The value of the serial number counter set by this command is effective until GS C 2 is executed, ESC @ is
executed, the printer is reset, or the power is turned off.
Comments to this Manuals